Mesh fence heights and panel sizes
V mesh panels come 1.03, 1.23, 1.53, 1.73, 2.03 and 2.43 m high, and twin wire 1.23 to 2.43 m, in panels 2.5 or 3.0 m wide. Taller fences stack panels on longer posts. Away from a house, a new fence over 1.2 m needs planning permission, and no fence over 2 m is exempt.
Every height with its price, the planning line, taller fences and how many panels a run takes.
Free and no obligation. Your request goes to one fencing contractor in your county, not a list.
- 1.03–2.43 mV mesh heights
- 2.5 or 3.0 mpanel widths
- 1.2 mnew fence planning limit
- 2 mthe most any exempt fence can be
Every height, with its price
V mesh panels
Twin wire panels, 656
With VAT, before posts. The 2.43 m V mesh panel is the 5 mm commercial grade, the only one sold that tall.
Price your mesh fence
Three taps and the kit price shows as you go. Your name and number come last, and only if you want a contractor to price the fitting.
V mesh, 1.8 m high, 25 to 50 m: €625 to €2,000.
How the price is worked out
The figure is what Irish sellers charge for the panels, posts and clamps a metre, with VAT, times the length you pick. Where sellers differ you see the lowest and the highest. 358 mesh and ball-stop fences are priced to the site. Fitting is not in the figure: a contractor prices it after walking the line. Use it to plan with. It isn't a quote.
Heights against the planning rule
Up to 1.2 m
- A new fence
- Exempt
- Replacing a fence as tall
- Exempt
1.23 m panel
- A new fence
- Just over the line
- Replacing a fence as tall
- Exempt
1.73 to 1.83 m
- A new fence
- Needs permission
- Replacing a fence as tall
- Exempt
2.03 m and over
- A new fence
- Needs permission
- Replacing a fence as tall
- Needs permission
Each is subject to the cases that lose the exemption, such as land the public has used. Planning permission.
Taller than a panel
Heights above 2.4 m are made by stacking panels on longer posts, the multi-lift method. 358 mesh is sold up to 3.0 m. A ball-stop goes higher again with netting on taller posts. Ball-stop fencing.
Widths and how many panels
A 2.5 m panel means four panels for every 10 m. A 50 m run takes 20 panels and 21 posts; a 3.0 m panel system takes 17 panels and 18 posts for the same run, the last panel cut down.
Counted for 2.5 m panels on a straight run. Corners and gates add posts.
Measuring the height
The limit is on the height of the fence as built, so count the gap under the panel and any post top standing above it, not just the panel.
Other mesh to look at
Questions before you order
What heights does mesh fencing come in?
V mesh panels come 1.03, 1.23, 1.53, 1.73, 2.03 and 2.43 m high, and twin wire 1.23 to 2.43 m, in panels 2.5 or 3.0 m wide. Taller fences stack panels on longer posts. Away from a house, a new fence over 1.2 m needs planning permission, and no fence over 2 m is exempt.
What is the most common mesh fence height?
Stock heights cluster at 1.2, 1.8, 2.0 and 2.4 m, in panels of 1.23, 1.73 to 1.83, 2.03 and 2.43 m.
How many mesh panels do I need for 50 m?
20 panels of 2.5 m and 21 posts on a straight run. Corners and gates add posts.
Can mesh fencing go higher than 2.4 m?
Yes. Panels are stacked on longer posts, and 358 is sold up to 3.0 m. Planning permission applies.
Is a 1.8 m mesh fence exempt from planning?
A new one isn't, away from a house: the limit is 1.2 m. Replacing a fence as tall is exempt up to 2 m.
Everything on this site
Mesh and gates
For your site
See the kit price before anyone rings
Pick the mesh, the height and the length. When you want a fitted price, it goes to a single fencing contractor in your county.
