V mesh fence panels

V mesh panels are welded steel mesh, 2.5 or 3.0 m wide, with V-shaped folds pressed across them. A 2.5 m panel costs €33 at 1.23 m high and €83 at 2.43 m, with VAT. With posts and clamps, a V mesh fence is €25 to €40 a metre at 1.8 m.

How a panel is made, the sizes and prices, and what a fence costs a metre with its posts.

Free and no obligation. Your request goes to one fencing contractor in your county, not a list.

  • 2.5 or 3.0 mpanel widths
  • 1.03–2.43 mpanel heights
  • 4 or 5 mmthe wire
  • €25–€40 a metrea metre at 1.8 m, kit
A drawing of a V mesh fence: welded panels with horizontal folds between square posts

How a V mesh panel is made

Upright wires every 50 mm and cross wires every 200 mm are welded at every crossing, which leaves openings of 50 by 200 mm, and 50 by 50 mm in places. Along lines across the panel the wire is pressed into a V. Those folds are what keep a long run straight and rigid.

The upright wires stand a little proud of the top wire. Turn the panel upside down and the top is flat. The steel is galvanised, then powder coated in green, black or anthracite grey.

Price your mesh fence

Three taps and the kit price shows as you go. Your name and number come last, and only if you want a contractor to price the fitting.

V mesh, 1.8 m high, 25 to 50 m: €625 to €2,000.

Step 1 of 5

Which mesh?

Pick the closest. The contractor asks the rest.

How the price is worked out

The figure is what Irish sellers charge for the panels, posts and clamps a metre, with VAT, times the length you pick. Where sellers differ you see the lowest and the highest. 358 mesh and ball-stop fences are priced to the site. Fitting is not in the figure: a contractor prices it after walking the line. Use it to plan with. It isn't a quote.

Panel sizes and prices

1.03 m€28standard
1.23 m€33standard
1.53 m€39standard
1.73 m€44standard
2.03 m€50standard
2.43 m€835 mm only

Each of these is a single 2.5 m panel with VAT, before posts and clamps. Some sellers sell 3.0 m panels instead, as a set with one post and the fittings, at €68 for 1.23 m by 2.5 m and €123 for 2.43 m by 3.0 m.

Standard or commercial panels

Standard V mesh

Wire
Ask the seller
1.23 m panel
€33
1.73 m panel
€44
2.03 m panel
€50
2.43 m panel
Not sold

Commercial V mesh

Wire
5 mm
1.23 m panel
€44
1.73 m panel
€55
2.03 m panel
€61
2.43 m panel
€83

The 2.43 m panel comes in the heavier wire only. Ask for the wire in millimetres on any quote: two panels that look the same can differ by a size.

Mesh panel fencing, posts included

At 1.2 m

€23 to €28 a metre

Panels, posts and clamps, VAT in.

At 1.8 m

€25 to €40 a metre

Panels, posts and clamps, VAT in.

At 2.0 m

€28 to €45 a metre

Panels, posts and clamps, VAT in.

At 2.4 m

€33 to €58 a metre

Panels, posts and clamps, VAT in.

A dig-in post is 0.5 to 0.7 m longer than the panel it carries: 1.7 m for a 1.23 m panel and 3.0 m for a 2.43 m one. Each joint takes 2 clamps on a 1.23 m panel and 5 on a 2.43 m panel. Fitting is priced after a site visit. The full price guide.

What to check on a quote

  • The wire. 4 mm or 5 mm, written down.
  • Width and height. 2.5 or 3.0 m panels, and which height.
  • The posts. 60 × 40 or 60 × 60 mm, and their length.
  • Clamps or clips. How many a joint, and security bolts.
  • Tips up or down. A flat top, if you want one.
  • The coating. Galvanised under the powder coat, and the RAL number.

Questions before you order

How much is a V mesh panel?

From €28 for a 1.03 m panel to €83 for a 2.43 m one, each 2.5 m wide, with VAT.

How wide is a V mesh panel?

2.5 m, or 3.0 m from some sellers. Some 3.0 m systems are set out at 3.03 m between posts.

What wire is V mesh made from?

Galvanised steel wire, 4 or 5 mm, powder coated. The commercial grade is 5 mm.

Can V mesh have a flat top?

Yes. The panels are turned upside down so the wire ends point down.

Why does V mesh have folds?

The V-shaped folds pressed across the panel stiffen it, so a long run stays straight without heavy wire.

Everything on this site

A drawing of a V mesh fence

See the kit price before anyone rings

Pick the mesh, the height and the length. When you want a fitted price, it goes to a single fencing contractor in your county.