Mesh fence posts and clamps

A dig-in post is 0.5 to 0.7 m longer than the panel it carries: 1.7 m for a 1.23 m panel and 3.0 m for a 2.43 m one. Each joint takes 2 clamps on a 1.23 m panel and 5 on a 2.43 m panel. Posts cost €19 to €33 in 60 × 40 mm and €29 to €42 in 60 × 60 mm, and clamps €3 to €4 each.

Post sizes and lengths, dig-in and bolt-down posts, clamps and clips, corners and ends.

Free and no obligation. Your request goes to one fencing contractor in your county, not a list.

  • 60 × 40 or 60 × 60post sizes, mm
  • 0.5–0.7 mlonger than the panel
  • 2–5clamps a joint
  • €15–€30a bolt-down shoe
A drawing of a mesh fence post set in a concrete footing and a post bolted to a slab

Post sizes and lengths

1.03 m1.5 mpost for this panel
1.23 m1.7 mpost for this panel
1.53 m2.0 mpost for this panel
1.73 m2.2 or 2.3 mpost for this panel
1.83 m2.2 mpost for this panel
2.03 m2.5 or 2.6 mpost for this panel
2.43 m3.0 mpost for this panel

Posts are box section, 60 × 40 mm or 60 × 60 mm, cut longer than the panel by the length that goes in the ground. Sold by fence height instead, a 1.8 m fence takes a 2.4 m post, a 2.0 m fence a 2.7 m post and a 2.4 m fence a 3.1 m post.

Price your mesh fence

Three taps and the kit price shows as you go. Your name and number come last, and only if you want a contractor to price the fitting.

V mesh, 1.8 m high, 25 to 50 m: €625 to €2,000.

Step 1 of 5

Which mesh?

Pick the closest. The contractor asks the rest.

How the price is worked out

The figure is what Irish sellers charge for the panels, posts and clamps a metre, with VAT, times the length you pick. Where sellers differ you see the lowest and the highest. 358 mesh and ball-stop fences are priced to the site. Fitting is not in the figure: a contractor prices it after walking the line. Use it to plan with. It isn't a quote.

Dig-in posts

A dug-in post set in post mix is the usual way. Rapid-setting mixes need no mixing: fill the hole halfway with water, stand the post in it, pour the mix round it, then level the post and hold it for about five minutes. One 20 kg mix reaches its final set in about 10 minutes and costs €10 a bag.

Bolt-down posts

On concrete, tarmac or a slab, a post stands on a shoe or base plate bolted to the surface instead of going into a hole. A shoe is €15 to €30, and a 1.25 m post with its base plate €22. Bolt-down posts are how 358 goes in where digging isn't practical, such as a car park.

Clamps, clips and bolts

1.23 m panel

2 clamps

A joint on the lowest common panel.

1.53 to 1.73 m

3 clamps

The middle heights.

1.83 to 2.03 m

4 clamps

Twin wire can take 5 clips instead.

2.43 m

5 clamps

Or 6 clips on twin wire.

Clamps are €3 to €4 each and clips €1 to €3. Single clamps go on the start and end posts, and corner clamps at the corners. The bolts are tamper-proof M8, and some sellers sell the key that turns them.

Corners and ends

Every end of a run and every corner takes a post of its own. Corner posts are €25 to €35 with VAT. On a long run the posts come to one a panel, plus one; on a short run with corners and gates they come to more.

Questions before you order

How deep do mesh fence posts go?

A dig-in post is 0.5 to 0.7 m longer than the panel it carries, and most of that is set in the ground.

What size posts does V mesh use?

60 × 40 mm or 60 × 60 mm box section, by the panel height.

How many clamps does a mesh panel need?

2 a joint on a 1.23 m panel, 3 on 1.53 to 1.73 m, 4 on 1.83 to 2.03 m and 5 on 2.43 m.

Can mesh fence posts be bolted down?

Yes. A shoe or base plate is bolted to concrete or tarmac and the post stands on it.

How long does post mix take to set?

One rapid mix reaches its final set in about 10 minutes. Hold the post level for about five.

Everything on this site

A drawing of a V mesh fence

See the kit price before anyone rings

Pick the mesh, the height and the length. When you want a fitted price, it goes to a single fencing contractor in your county.