Planning permission for a mesh fence
Away from a house, a new fence is exempt from planning permission up to 1.2 m high, or up to the height of the fence it replaces, and never over 2 m. A new 1.8 m or 2.4 m mesh fence round a school, a pitch or a yard needs permission unless it replaces one as tall, up to 2 m.
The height limits for a fence away from a house, the cases that lose the exemption, and how to get an answer in writing.
Free and no obligation. Your request goes to one fencing contractor in your county, not a list.
- 1.2 ma new fence, exempt away from a house
- 2 mthe most any exempt fence can be
- €80a section 5 declaration
- 4 weeksfor the council to decide
The rule
A fence anywhere other than at a house falls under Class 11 of the exempted development rules: putting up, lowering, repairing or replacing a fence. A hoarding or a sheet metal fence is left out of it. Welded mesh is wire, not sheet metal.
- 1.2 m for something new. A new fence can be up to 1.2 m high.
- Or the height it replaces. A replacement can be as tall as the fence it replaces, whichever of the two is greater.
- 2 m at most. In any event no more than 2 m.
The rules are in the Planning and Development Regulations 2001, Schedule 2, Part 1.
What that means for each panel
1.03 m panel
- A new fence
- Within 1.2 m
- Replacing a fence as tall
- Exempt
1.23 m panel
- A new fence
- 3 cm or more over 1.2 m
- Replacing a fence as tall
- Exempt if the old fence was as tall
1.73 to 1.83 m panel
- A new fence
- Needs permission
- Replacing a fence as tall
- Exempt if the old fence was as tall
2.03 m panel
- A new fence
- Needs permission
- Replacing a fence as tall
- Over 2 m: needs permission
2.43 m panel
- A new fence
- Needs permission
- Replacing a fence as tall
- Over 2 m: needs permission
Measure from the ground: the gap under a panel and a post standing proud of it add to the height. Every line above is subject to the cases below.
Price your mesh fence
Three taps and the kit price shows as you go. Your name and number come last, and only if you want a contractor to price the fitting.
V mesh, 1.8 m high, 25 to 50 m: €625 to €2,000.
How the price is worked out
The figure is what Irish sellers charge for the panels, posts and clamps a metre, with VAT, times the length you pick. Where sellers differ you see the lowest and the highest. 358 mesh and ball-stop fences are priced to the site. Fitting is not in the figure: a contractor prices it after walking the line. Use it to plan with. It isn't a quote.
Where the exemption is lost
- A planning condition. If the site's own permission has a condition the fence would break, or a use it would conflict with.
- Road safety. A fence that would endanger public safety by a traffic hazard or by obstructing road users, at a junction or an entrance.
- Land the public has used. Fencing in land habitually open to or used by the public in the 10 years before, for recreation or as a way to the seashore, a mountain, a lakeshore, a riverbank or another place of natural beauty.
- A public right of way. A fence that would obstruct one.
- An architectural conservation area. Work on the outside of a structure that would materially affect the character of the area.
- A special amenity area order. Class 11 is not exempt inside one.
At a house
A fence at a house comes under a different class, Class 5. It names gates, railings, wooden fences and walls, up to 2 m, or 1.2 m in front of the house, and it says no such structure can be a metal palisade or other security fence. Ask the council before putting welded mesh round a house.
Getting an answer in writing
A section 5 declaration from the council settles whether a fence is exempt. It costs €80, and the council has 4 weeks to decide. Send the council its section 5 form, the site maps, the fee and a description of the fence: the mesh, the height, the length and where it runs.
Each council answers for its own area. Dublin has four councils, and Cork and Galway each have a city council and a county council. Counties covered.
What changed in 2026
New exempted development rules came in on 27 July 2026, for extensions, sheds and garden rooms, heat pumps, dormers and bin stores at houses. The fence classes, 5 and 11, were not changed.
Questions before you order
Do I need planning permission for a 2.4 m mesh fence?
Under Class 11 it is not exempt, because no fence over 2 m is. Ask the council: a section 5 declaration or a planning application settles it.
Can I replace an old fence without planning permission?
Yes, at the height of the old one up to 2 m, as long as none of the cases that lose the exemption applies.
Is a 1.2 m mesh fence exempt?
A new fence up to 1.2 m is. A 1.23 m panel is 3 cm over that before the gap under it, so check with the council or use 1.03 m panels.
Does a school need planning permission for a fence?
The same limits apply as for any site that is not a house: 1.2 m for a new fence, or the height it replaces, never over 2 m.
What is a section 5 declaration?
A section 5 declaration from the council settles whether a fence is exempt. It costs €80, and the council has 4 weeks to decide.
Can I fence land the public has walked on?
Fencing in land habitually open to the public in the 10 years before, for recreation or as a way to the shore or a beauty spot, is not exempt at any height.
Does a fence at an entrance need permission?
If it would endanger public safety by a traffic hazard or by obstructing road users, it is not exempt, whatever its height.
Everything on this site
Mesh and gates
For your site
See the kit price before anyone rings
Pick the mesh, the height and the length. When you want a fitted price, it goes to a single fencing contractor in your county.
