What V mesh fencing costs in Ireland

V mesh fencing costs €25 to €40 a metre for a 1.8 m fence and €33 to €58 a metre at 2.4 m, bought as panels, posts and clamps with VAT. 656 twin wire is €33 to €45 a metre at 1.8 m and 868 twin wire €45 to €59 a metre. Fitting is priced after a site visit, because the ground, the corners and the gates set it.

Our price guide for every mesh and height, the gates and posts, and what a fitted price depends on.

Free and no obligation. Your request goes to one fencing contractor in your county, not a list.

  • €25–€40 a metreV mesh at 1.8 m, kit with VAT
  • €33–€58 a metreV mesh at 2.4 m
  • €60–€77 a metre868 twin wire at 2.4 m
  • €265–€580a single mesh gate with posts
A drawing of a run of V mesh fencing with a pedestrian gate, a person beside it for scale

Gates, posts and the parts

Single gate, 1.0 or 1.2 m wide

€265 to €580

1.03 to 2.43 m high, with its posts.

Double gates, 3 to 6 m wide

€910 to €2,100

80 × 80 mm posts included. At 4 m wide: €1,300 at 1.73 m, €1,600 at 2.03 m, €1,900 at 2.43 m.

868 gate, 1.2 × 1.8 m

€650

Box frame, 100 × 100 mm posts, a drop bolt and a lock bolt. Delivery extra.

Posts, 60 × 40 mm

€19 to €33

1.5 to 3.0 m long, cut to the panel height.

Posts, 60 × 60 mm

€29 to €42

2.0 to 3.0 m long, for heavier panels.

Clamps

€3 to €4 each

2 a joint on a 1.23 m panel, up to 5 on a 2.43 m panel.

Bolt-down shoe

€15 to €30

Holds a post on concrete or tarmac instead of a hole.

Post mix, 20 kg

€10

A rapid-setting mix that needs no mixing.

What moves a price up or down

  • The mesh. At every height 868 costs more than 656, and 656 more than V mesh.
  • The height. V mesh at 2.4 m runs a third to a half dearer a metre than at 1.8 m.
  • The ground. A hole in soil is quick. Concrete or tarmac means bolted shoes or breaking out.
  • Corners and ends. Each adds a post, and corners take corner clamps.
  • Gates. One single gate costs €265 to €580, as much as several metres of fence.
  • Delivery. Some sellers charge for it on top, priced by where the site is.

Price your mesh fence

Three taps and the kit price shows as you go. Your name and number come last, and only if you want a contractor to price the fitting.

V mesh, 1.8 m high, 25 to 50 m: €625 to €2,000.

Step 1 of 5

Which mesh?

Pick the closest. The contractor asks the rest.

How the price is worked out

The figure is what Irish sellers charge for the panels, posts and clamps a metre, with VAT, times the length you pick. Where sellers differ you see the lowest and the highest. 358 mesh and ball-stop fences are priced to the site. Fitting is not in the figure: a contractor prices it after walking the line. Use it to plan with. It isn't a quote.

Five runs, priced

  • 25 m of V mesh at 1.2 m: €575 to €700.
  • 50 m of V mesh at 1.8 m: €1,250 to €2,000.
  • 60 m of 656 twin wire at 1.8 m: €1,980 to €2,700.
  • 80 m of 868 twin wire at 2.0 m: €4,000 to €5,200.
  • 120 m of V mesh at 2.4 m: €3,960 to €6,960.

Add gates at their own price. Worked from the ranges above, not a quote. The planner on this page does the same sum for the mesh, height and length you pick.

V mesh at 1.8 m, by length

25 m€625 to €1,000V mesh, 1.8 m
50 m€1,250 to €2,000V mesh, 1.8 m
100 m€2,500 to €4,000V mesh, 1.8 m
200 m€5,000 to €8,000V mesh, 1.8 m

That is the kit only, with VAT. Over a long run the posts come to one a panel, plus one at each end.

The fitting

No fencing contractor in Ireland publishes a fitted price a metre for mesh, and two runs of the same length can price far apart once the ground, the corners, the gates and the access are counted. The contractor walks the line and puts one figure in writing.

What the contractor looks at

  • The line. Its length, the corners and the ends.
  • The ground. Soil, rock, concrete or tarmac along it.
  • The slope. How much the panels have to step.
  • Gates. How many, how wide and how they lock.
  • The old fence. Whether it comes down first.
  • Planning. Whether the height needs permission.

VAT on a fitted job

Bought on their own, panels, posts and gates carry VAT at 23%. Supplied and fitted as a permanent fence, the job is at 13.5%, unless the materials come to more than two-thirds of the price before VAT, when 23% applies to the lot.

On a €10,000 job before VAT with €6,000 of materials, the materials are under two-thirds (€6,667), so VAT is 13.5%: €1,350. With €7,000 of materials, 23% applies to the whole job: €2,300. VAT on fencing.

What a good quote includes

Ten things to see in writing. They are what make two quotes comparable.

  • The mesh. V mesh, 656, 868 or 358, the wire in millimetres and the panel height.
  • The length. Metres of fence, with the number of panels, posts, corners and ends.
  • Posts and fixings. 60 × 40 or 60 × 60 mm posts, dug in or bolted down, clamps or clips, and security bolts.
  • The ground. Digging, post mix, and any concrete or tarmac to break out or bolt into.
  • The slope. Whether the panels are stepped, and where.
  • Gates. Each gate's width and height, its lock, and whether it is in the price.
  • Colour and coating. The RAL number, and galvanised steel under the powder coat.
  • The old fence. Taking it down and taking it away, if there is one.
  • Planning. Whether the height needs permission or a section 5 declaration, and who looks after it.
  • VAT and dates. The VAT rate on the invoice, the start date and the days on site.

Questions before you order

How much is V mesh fencing per metre?

As a kit with VAT: €23 to €28 a metre at 1.2 m, €25 to €40 a metre at 1.8 m, €28 to €45 a metre at 2.0 m and €33 to €58 a metre at 2.4 m.

How much is a 2.4 m mesh fence per metre?

V mesh €33 to €58 a metre, 656 twin wire €43 to €59 a metre and 868 €60 to €77 a metre, as a kit with VAT.

How much is 868 twin wire fencing?

€38 to €44 a metre at 1.2 m, €45 to €59 a metre at 1.8 m, €50 to €65 a metre at 2.0 m and €60 to €77 a metre at 2.4 m, kit with VAT.

How much does a mesh gate cost?

A single gate with its posts is €265 to €580. A pair of double gates, 3 to 6 m wide, is €910 to €2,100.

What does fitting cost?

No fencing contractor in Ireland publishes a fitted price a metre for mesh, and two runs of the same length can price far apart once the ground, the corners, the gates and the access are counted. The contractor walks the line and puts one figure in writing.

Do the prices include VAT?

Kit prices include VAT at 23%. A fitted permanent fence is invoiced at 13.5% unless the materials are over two-thirds of the price before VAT.

Is black mesh dearer than green?

At the seller with the widest range, green, black and anthracite grey cost the same. Another prices some black sets a few euro either side of green.

How is 358 mesh priced?

358 is sold on request, so a contractor prices it from your measurements.

Everything on this site

A drawing of a V mesh fence

See the kit price before anyone rings

Pick the mesh, the height and the length. When you want a fitted price, it goes to a single fencing contractor in your county.